“Atacama soil microbiome” tutorial¶
This tutorial is designed to serve two purposes. First, it illustrates the initial processing steps of paired-end read analysis, up to the point where the analysis steps are identical to single-end read analysis. This includes the importing, demultiplexing, and denoising steps, and results in a feature table and the associated feature sequences. Second, this is intended to be a self-guided exercise that could be run after the moving pictures tutorial to gain more experience with QIIME 2. For this exercise, we provide some questions that can be used to guide your analysis, but do not provide commands that will allow you to address each. Instead, you should apply the commands that you learned in the moving pictures tutorial.
In this tutorial you’ll use QIIME 2 to perform an analysis of soil samples from the Atacama Desert in northern Chile. The Atacama Desert is one of the most arid locations on Earth, with some areas receiving less than a millimeter of rain per decade. Despite this extreme aridity, there are microbes living in the soil. The soil microbiomes profiled in this study follow two east-west transects, Baquedano and Yungay, across which average soil relative humidity is positively correlated with elevation (higher elevations are less arid and thus have higher average soil relative humidity). Along these transects, pits were dug at each site and soil samples were collected from three depths in each pit.
Obtain the data¶
Start by creating a directory to work in.
mkdir qiime2-atacama-tutorial cd qiime2-atacama-tutorial
Before starting the analysis, explore the sample metadata to familiarize
yourself with the samples used in this study. The sample metadata is
available as a Google Sheet. This
sample-metadata.tsv file is used
throughout the rest of the tutorial.
Save as: sample-metadata.tsv
wget \ -O "sample-metadata.tsv" \ "https://data.qiime2.org/2022.2/tutorials/atacama-soils/sample_metadata.tsv"
curl -sL \ "https://data.qiime2.org/2022.2/tutorials/atacama-soils/sample_metadata.tsv" > \ "sample-metadata.tsv"
Next, you’ll download the multiplexed reads. You will download three
fastq.gz files, corresponding to the forward, reverse, and barcode (i.e.,
index) reads. These files contain a subset of the reads in the full data set
generated for this study, which allows for the following commands to be run
relatively quickly, however, we will perform additional subsampling in this
tutorial to further improve the run time.
Save as: emp-paired-end-sequences/forward.fastq.gz
wget \ -O "emp-paired-end-sequences/forward.fastq.gz" \ "https://data.qiime2.org/2022.2/tutorials/atacama-soils/10p/forward.fastq.gz"
curl -sL \ "https://data.qiime2.org/2022.2/tutorials/atacama-soils/10p/forward.fastq.gz" > \ "emp-paired-end-sequences/forward.fastq.gz"
Save as: emp-paired-end-sequences/reverse.fastq.gz
wget \ -O "emp-paired-end-sequences/reverse.fastq.gz" \ "https://data.qiime2.org/2022.2/tutorials/atacama-soils/10p/reverse.fastq.gz"
curl -sL \ "https://data.qiime2.org/2022.2/tutorials/atacama-soils/10p/reverse.fastq.gz" > \ "emp-paired-end-sequences/reverse.fastq.gz"
Save as: emp-paired-end-sequences/barcodes.fastq.gz
wget \ -O "emp-paired-end-sequences/barcodes.fastq.gz" \ "https://data.qiime2.org/2022.2/tutorials/atacama-soils/10p/barcodes.fastq.gz"
curl -sL \ "https://data.qiime2.org/2022.2/tutorials/atacama-soils/10p/barcodes.fastq.gz" > \ "emp-paired-end-sequences/barcodes.fastq.gz"
Paired-end read analysis commands¶
To analyze these data, the sequences that you just downloaded must first be
imported into an artifact of type
qiime tools import \ --type EMPPairedEndSequences \ --input-path emp-paired-end-sequences \ --output-path emp-paired-end-sequences.qza
You next can demultiplex the sequence reads. This requires the sample
metadata file, and you must indicate which column in that file contains the
per-sample barcodes. In this case, that column name is
In this data set, the barcode reads are the reverse complement of those
included in the sample metadata file, so we additionally include the
--p-rev-comp-mapping-barcodes parameter. After demultiplexing, we can
generate and view a summary of how many sequences were obtained per sample.
qiime demux emp-paired \ --m-barcodes-file sample-metadata.tsv \ --m-barcodes-column barcode-sequence \ --p-rev-comp-mapping-barcodes \ --i-seqs emp-paired-end-sequences.qza \ --o-per-sample-sequences demux-full.qza \ --o-error-correction-details demux-details.qza
Let’s subsample the data. We will perform this subsampling in this tutorial for two reasons - one, to speed up the tutorial run time, and two, to demonstrate the functionality.
The following example of subsampling reads is meant to
illustrate the subsampling capability of
q2-demux. If you are
considering subsampling the reads of a study, please make sure you have
thought it through and have reasonable justification.
qiime demux subsample-paired \ --i-sequences demux-full.qza \ --p-fraction 0.3 \ --o-subsampled-sequences demux-subsample.qza qiime demux summarize \ --i-data demux-subsample.qza \ --o-visualization demux-subsample.qzv
Let’s take a look at the summary in
demux-subsample.qzv. In the
“Per-sample sequence counts” table on the “Overview” tab, there are 75
samples in the data. If we look at the last 20 or so rows in the table,
though, we will observe that many samples have fewer than 100 reads in them -
let’s filter those samples out of the data:
The following example of filtering samples is meant to
illustrate the filtering capability of
q2-demux, if you are
considering filtering samples out of a study, please make sure you have
thought it through and have reasonable justification.
qiime tools export \ --input-path demux-subsample.qzv \ --output-path ./demux-subsample/ qiime demux filter-samples \ --i-demux demux-subsample.qza \ --m-metadata-file ./demux-subsample/per-sample-fastq-counts.tsv \ --p-where 'CAST([forward sequence count] AS INT) > 100' \ --o-filtered-demux demux.qza
Next, we’ll look at the sequence quality based on ten-thousand randomly
selected reads from the subsampled and filtered data, and then denoise the
data. When you view the quality plots, note that in contrast to the
corresponding plots in the moving pictures tutorial,
there are now two interactive plots to be considered together. The plot on
the left presents the quality scores for the forward reads, and the plot on
the right presents the quality scores for the reverse reads. We’ll use these
plots to determine what trimming parameters we want to use for denoising with
DADA2, and then denoise the reads using
In this example we have 150-base forward and reverse reads. Since we need the
reads to be long enough to overlap when joining paired ends, the first
thirteen bases of the forward and reverse reads are being trimmed, but no
trimming is being applied to the ends of the sequences to avoid reducing the
read length by too much. In this example, the same values are being provided
--p-trim-left-r and for
--p-trunc-len-r, but that is not a requirement.
qiime dada2 denoise-paired \ --i-demultiplexed-seqs demux.qza \ --p-trim-left-f 13 \ --p-trim-left-r 13 \ --p-trunc-len-f 150 \ --p-trunc-len-r 150 \ --o-table table.qza \ --o-representative-sequences rep-seqs.qza \ --o-denoising-stats denoising-stats.qza
At this stage, you will have artifacts containing the feature table, corresponding feature sequences, and DADA2 denoising stats. You can generate summaries of these as follows.
qiime feature-table summarize \ --i-table table.qza \ --o-visualization table.qzv \ --m-sample-metadata-file sample-metadata.tsv qiime feature-table tabulate-seqs \ --i-data rep-seqs.qza \ --o-visualization rep-seqs.qzv qiime metadata tabulate \ --m-input-file denoising-stats.qza \ --o-visualization denoising-stats.qzv
From this point, analysis of paired-end read data progresses in the same way as analysis of single-end read data. You can therefore continue your analyses of these data following the steps that you ran in the moving pictures tutorial.
Questions to guide data analysis¶
Use the following questions to guide your further analyses of these data data.
What value would you choose to pass for
--p-sampling-depth? How many samples will be excluded from your analysis based on this choice? Approximately how many total sequences will you be analyzing in the
What sample metadata or combinations of sample metadata are most strongly associated with the differences in microbial composition of the samples? Are these associations stronger with unweighted UniFrac or with Bray-Curtis? Based on what you know about these metrics, what does that difference suggest? For exploring associations between continuous metadata and sample composition, the commands
qiime metadata distance-matrixin combination with
qiime diversity manteland
qiime diversity bioenvwill be useful. These were not covered in the Moving Pictures tutorial, but you can learn about them by running them with the
What do you conclude about the associations between continuous sample metadata and the richness and evenness of these samples? For exploring associations between continuous metadata and richness or evenness, the command
qiime diversity alpha-correlationwill be useful. This was not covered in the Moving Pictures tutorial, but you can learn about it by running it with the
Which categorical sample metadata columns are most strongly associated with the differences in microbial community richness or evenness? Are these differences statistically significant?
In taxonomic composition bar plots, sort the samples by their average soil relative humidity, and visualize them at the phylum level. What are the dominant phyla in these samples? Which phyla increase and which decrease with increasing average soil relative humidity?
What phyla differ in abundance across vegetated and unvegetated sites?
How do your conclusions differ if you skip the subsampling step above, if at all?
The data used in this tutorial is presented in: Significant Impacts of Increasing Aridity on the Arid Soil Microbiome. Julia W. Neilson, Katy Califf, Cesar Cardona, Audrey Copeland, Will van Treuren, Karen L. Josephson, Rob Knight, Jack A. Gilbert, Jay Quade, J. Gregory Caporaso, and Raina M. Maier. mSystems May 2017, 2 (3) e00195-16; DOI: 10.1128/mSystems.00195-16.